-+ 0.00%
-+ 0.00%
-+ 0.00%

A century in the making

Barchart·11/20/2026 00:40:16
Listen to the news

The aviation sector is at a critical turning point. Faced with the dual challenge of meeting soaring global demand and reducing its carbon footprint, the industry is embracing sustainable aviation fuel (SAF) as a key contributor toward net-zero ambitions.
However, scaling SAF production is far from straightforward. It requires both innovation and resilience in supply chains, underpinned by technologies that can flexibly adapt to a variety of feedstocks.
One of the most powerful tools available today is a century-old chemical process that has been reimagined for modern climate objectives. In 2025, Honeywell marked 100 years since the invention of the Fischer-Tropsch (FT) process. Originally developed in 1925 by German chemists Franz Fischer and Hans Tropsch, this process has evolved into one of the most technically versatile and scalable platforms for producing SAF from a wide range of carbon-containing materials.

Fischer-Tropsch at 100: The modern engine of SAF production

FT technology has a deep heritage at Honeywell and bp, with collaborative development dating back to the 1980s. This work culminated in a major demonstration plant operated between 2002 and 2009 at bp’s Nikiski site in Alaska.
The plant successfully processed pipeline natural gas into synthetic crude and exceeded performance targets across catalyst productivity, selectivity and lifetime, with a single catalyst charge running for more than 7,000 hours without regeneration.
The Fischer-Tropsch process catalytically converts syngas, a mixture of carbon monoxide (CO) and hydrogen (H₂), into longer-chain hydrocarbons that can be refined into fuels such as kerosene, diesel and naphtha. Unlike other SAF production routes, which rely heavily on specific biological feedstocks, the syngas used for FT synthesis is feedstock-agnostic. This makes it an especially valuable tool in the effort to scale SAF.

The FT reaction is exothermic and typically operates within a temperature range of 200 to 240 ºC and at pressures of 20 to 40 bar. The choice of catalyst is central to performance. Cobalt-based catalysts are widely used for their high activity and selectivity to liquid hydrocarbons, particularly when processing syngas with a low CO₂ content. Iron-based catalysts, meanwhile, offer robustness when higher CO₂ or water gas shift activity is desired.
Modern FT systems require precise heat management to maintain reaction stability and product quality.
The FT CANS™ technology, co-developed by Honeywell and bp, meets this challenge through the combination of an advanced catalyst with a unique reactor architecture.
Each reactor tube houses up to 80 catalyst carriers, forming mini radial-flow beds with intercooling along the tube length. This modular, radial-flow design precisely controls temperature across the catalyst bed, delivering excellent heat transfer, enhanced conversion and a step change in performance over conventional fixed-bed designs.
The system achieves carbon monoxide conversion rates exceeding 90% and reduces catalyst volumes by 50% for the same throughput.
Additionally, it cuts the number of reactor tubes by 95% and reduces overall capital costs by up to 50%. The sealed CANS catalyst carriers prevent catalyst attrition and simplify replacement, making operation safer and more cost-effective. The technology’s modularity allows producers to match plant scale to available feedstocks, supporting both centralised and distributed production models.

The feedstock imperative: Beyond HEFA

Hydroprocessed esters and fatty acids (HEFA) have dominated early SAF deployment, primarily due to the relative simplicity of converting used cooking oil and other lipids into jet fuel-compatible molecules.
However, HEFA feedstock availability is limited and geographically uneven. In the European Union, for instance, more than 80% of HEFA feedstocks are imported. As other nations introduce SAF mandates and aim to build domestic capacity, competition for these limited resources will only intensify.

FT synthesis offers a route to break this dependency. Syngas, the FT process input, can be produced from a range of sources through gasification or chemical transformation:

  • Municipal solid waste (MSW): Offers a dual benefit by reducing landfill use and supplying syngas for SAF. Pre-treatment and cleaning of the syngas are essential to remove contaminants such as tar, sulphur compounds and particulates. Established technology for syngas conditioning can be integrated to ensure consistent feed quality for downstream FT reactors.
  • Forestry residues and agricultural waste: Biomass sources such as wood chips, wheat straw and corn stover can be converted to syngas via gasification. These resources are often underutilised, but can be readily mobilised in rural or forest-adjacent regions. Gasification typically yields syngas with a CO to H₂ ratio close to 1:1, which can be readily optimised for FT synthesis.
  • Captured CO₂ and green hydrogen: Power-to-liquid (PtL) pathways generate syngas through a reverse water-gas shift (RWGS) reaction, where captured CO₂ is combined with renewable hydrogen. Honeywell’s HyCOgen™ technology enables this route by converting CO₂ into CO with high selectivity. This allows CO₂ to become an active carbon source in SAF production rather than a waste stream.

Maximising output with process integration

Traditional biomass-to-liquid processes often rely on a water gas shift (WGS) reactor to adjust the CO to H₂ ratio of syngas. While this achieves the necessary stoichiometry for FT synthesis, it has a significant drawback: it converts valuable CO into CO₂, which must then be separated and potentially vented. This represents both a loss of carbon and a reduction in overall process performance.
A more effective approach can be to supplement the syngas with additional hydrogen, thereby avoiding the WGS step altogether, but while this improves SAF yield, some carbon is still lost.
To achieve the biggest increase in product yield, HyCOgen technology can be integrated to capture the CO₂ produced during gasification.
Hybrid configurations using both bio-based and PtL syngas sources can deliver over 2.5 times more SAF yield compared with conventional WGS-based systems.
In projects such as the planned DG Fuels plant in Louisiana, which is designed to process up to one million tonnes of biomass annually, FT CANS technology is integrated with HyCOgen to maximise product yields.
It represents the largest announced SAF production project using FT technology and demonstrates the scalability and adaptability of the approach.

Certification, compatibility and regulation

SAF produced via the Fischer-Tropsch route is approved under ASTM D7566 Annex A1 as synthetic paraffinic kerosene (FT-SPK). It can be blended up to 50% with conventional Jet A or Jet A-1 fuel and used as a drop-in replacement for jet fuel with no modifications required to the aircraft fleet or refuelling infrastructure.
Regulatory frameworks are aligning to support deployment of SAF. The EU’s RefuelEU Aviation initiative mandates 6% SAF by 2030, with sub-targets for power-to-liquid fuels. The US SAF Grand Challenge aims to produce 3 billion gallons by 2030 and 35 billion by 2050. The UK has committed to 10% SAF by 2030, with caps on HEFA and incentives for waste-based and non-biological renewable fuels.
These frameworks provide clear market signals to support investment in SAF production.

A platform for the future

Reflecting on 100 years of Fischer-Tropsch technology, it is clear its relevance today has never been greater. What began in the laboratory in 1925 has matured into an important contributor to decarbonisation.
Honeywell’s FT CANS and HyCOgen technologies represent the latest chapter in this evolution, enabling producers to maximise SAF output, support industry ambitions to reduce emissions and adapt to a changing energy landscape.
The path to net-zero aviation will not be defined by any single feedstock or technology. Instead, it will be built on flexibility, integration and innovation. Fischer-Tropsch synthesis, enhanced with modern engineering and globally eligible feedstocks, provides a firm foundation on which the SAF industry can grow.

The next 100 years will be shaped by how carbon, waste and energy are managed. FT technology, being at the centre, is ready to take that challenge forward.

The post A century in the making appeared first on Biofuels International Magazine.